- Unit 9, Millside Industrial Estate, Southmill Rd, Bishop's Stortford CM23 3DP, United Kingdom
- +44 012 7937 1085
- Mon - Fri: 7:00 - 15:00
Product categories
Showing all 10 results
25 standard is a slimline aluminium glazing system comprising “1-part” for use as a head and wall channel, and a “2-part” (chair and bead) used as a base and wall channel. Both components measure 25mm in width by 25mm in height and are compatible with all other components in 25mm system. 25 standard sections come with pre-inserted Q-Lon acoustic seal that accommodates either 10mm/10.8mm or 12mm/12.8mm glass. All components are 3000 mm long.
The 25 deep is single-glazed “1-part” section, for use as a head channel that offers a deflection of +/-20mm. It measures 25mm in width by 50mm in height.
The 25 deep section comes with pre-inserted Q-Lon acoustic seal that accommodates either 10mm/10.8mm or 12mm/12.8mm glass.
This section is compatible with all other components in 25mm system.
All components are 3000mm long.
The male and female deflection set offers a deflection of +/-25mm. The female section measures 32.5mm x 68mm, whereas the male is 25mm x 63mm. The overall measurements of the set are 32.5mm / 25mm in width by 93mm in height.
The 25 male section comes with a pre-inserted Q-Lon acoustic seal that accommodates either 10mm/10.8mm or 12mm/12.8mm glass. The 25 female section has a pre-inserted brush to protect the set from scratching against each other.
These sections collaborate with all other components in the 25mm system.
All components are 3000mm long.
The 25 Banded is achieved by using aluminium bars which can be cut and installed to bespoke layout. When installed it is flush to the trackwork for enhanced aesthetics. It measures 25mm wide by 6mm thick and is bonded to both faces of glass using double sided foam tape.
Banded screens can be complemented by banded on site glass door.
This is achieved using 16mm x 1.6mm ‘U’ channel and 25mm x 1.6mm flat bars. All components are 3000mm long.
The 25 door frame is a part of a single glazed system. It has a slimline but robust design. It can accommodate a door up to 44mm thick or a 54mm rebated door. Suitable for frameless glass, framed glass and timber doors. Incredibly easy to install, it is mitre cut in our workshop in Bishop’s Stortford to bespoke sizes, with pre-drilled and counter-sunk holes at the top of the head, and includes internal locating mitre brackets and an aluminium fixing plate for the bottom of the door legs. It comes with a pre-inserted Q-Lon acoustic seal and a clip-in section at the top of the head for easier installation of the head to the ceiling. We offer a bespoke milling service for hinges and a strike plate as per customer specification. This door frame can be used with floor springs and is compatible with all other components in the 25mm system. All door frames can be cut up to 3000mm.
Are you interested in seeing our full offer with examples? Leave your e-mail and we'll share an online catalogue in minutes!
We are experts in manufacturing of aluminum products for glazed partitions, harnessing a wealth of experience. Our commitment to excellence ensures that we consistently meet our clients’ high expectations, delivering superior quality within the agreed timeframe and budget.
